Filter
Top Products
Mounting the top soft-close
mechanism:
^
Remove the cover a from the panel
b, turn it 180° and replace it on the
other side.
^
Hook the spacer on the handle side
into the retainer (A).
^
Hook the soft-close mechanism into
the retainer (B) on the appliance
side.
Push both parts outwards until they
engage.
^
With the three screws c, first screw
on the spacer on the handle side and
then the soft-close mechanism on the
appliance side.
^ Hang the panel b on the shock
absorber arm d.
^
Push the cover e on from the side so
that the openings for the pin f are
on top of each other.
^
Pull the shock absorber arm d
towards the hinge bracket and insert
the pin f from the top so that the
square rests in the recess.
^
Then engage the cover e
completely.
Take care that the cover e sits
correctly to ensure that the door closes
properly and the pin is secured.
Changing the door hinging
57