Filter
Top Products
Before using for the first time
The stainless steel frames of the
shelves have a protective plastic
coating to prevent scratching during
transportation.
^
Do not remove the plastic until the
appliance has been installed.
^
After removing the plastic, treat the
stainless steel with a stainless steel
cleaner.
This will help protect the stainless
steel and prevent resoiling.
^
Clean the inside of the appliance and
the accessories with a mild solution
of warm water and liquid dish soap.
To ensure proper functioning of the
appliance, let it stand for approx.
30 mins to an hour before it is
connected to the electrical supply.
Turning the appliance on
With the main switch you can turn the
appliance on.
^
Press the main switch on the right
side of the control panel.
The temperature display for the
refrigerator section lights up, and the
interior lighting comes on when the door
is opened.
Bars light up in the freezer section
display until the selected temperature is
reached.
The appliance begins cooling.
Allow the appliance to run for a few
hours before placing food in it. This will
enable it to sufficiently cool.
Cool pack
Place the cool pack in the top freezer
drawer. The cool pack will be at
maximum performance after it has been
in the freezer for approx. 24 hours.
Turning the appliance off
^ Press the main switch on the right
side of the appliance until both
temperature displays go out.
If the cooling system does not turn off
the safety lock has been activated.
Before use
10