Filter
Top Products
The following installation instructions
are for a right-hinged appliance
door. If you have converted the
appliance door to be left-hinged,
you will need to adapt the
instructions accordingly.
Tools needed:
–
a Philips head screwdriver,
–
various sizes of Torx screwdrivers,
–
an open-ended wrench.
Custom door panels
The total weight of the panel(s) must
not exceed the following, otherwise the
hinges may be damaged:
KFN 9755 iDE
Upper door ...........31lbs(14kg)
Lower door ...........27lbs(12kg)
Installing the appliance as a
room divider
If you wish to install the appliance as a
room divider, the back of the installation
niche must be fitted with a panel, so the
back of the appliance is not exposed.
Aligning the installation niche
Before installing the appliance, the
cabinetry must be carefully aligned
using a level. The cabinetry corners
must be at 90° angles, otherwise the
custom door panels will not be flush
with all 4 corners of the cabinetry.
Installing the appliance
49