Filter
Top Products
For the automatic ice cube maker to
operate, it must be connected to the
household water supply. See
"Plumbing".
Turning on
^
Turn the appliance on with the main
switch.
^
Open the top left drawer of the
freezer section.
^ Press the On/Off button on the ice
cube maker. The indicator light will
turn on.
^ Close the drawer.
Ice cubes will not be produced
unless the drawer is completely
closed.
After the appliance is turned on for the
very first time, it can take up to 24 hours
for the first ice cubes to drop out of the
ice cube maker and collect in the
drawer.
Thereafter, when the ice cube maker is
turned off then on again it will take a
maximum of 6 hours for ice cubes to be
produced.
Do not use the ice cubes from the
first three ice productions. This will
ensure that the water supply lines
are flushed.
This applies for the very first use,
and whenever the appliance has
been out of service for an extended
period of time.
Making a large amount of ice cubes
The amount of ice cubes produced
depends on the temperature in the
freezer section. The lower the
temperature, the more ice cubes will be
produced in a given period of time.
The ice cube production is interrupted
automatically as soon as the ice cube
drawer is full.
^ To produce a larger amount of ice
cubes exchange the ice cube drawer
with the drawer on the right.
As soon as the drawer is closed the ice
production will continue.
Turning off the ice cube maker
^
Press the On/Off button on the ice
cube maker until the indicator light
goes out.
If the ice cube maker is turned off, the
ice cube drawer can be used to store
food.
Ice cube maker
23