Filter
Top Products
Installation
This appliance is top-heavy and
must be secured to prevent it from
tipping forward.
~
Before installation or service,
disconnect the power supply to the
work area by unplugging the unit,
"tripping" the circuit breaker or
removing the fuse.
~
This appliance must be installed
and connected in compliance with the
installation instructions.
~
Installation and repair work should
be performed by a Miele authorized
service technician. Work by unqualified
persons could be dangerous and may
void the warranty.
~
Installation must comply with local
plumbing regulations and state laws.
The manufacturer cannot be held liable
for damage caused by a faulty
connection to the water supply.
~
Do not operate any appliance with a
damaged cord or plug, or if the
appliance has been damaged in any
manner. Contact Miele’s Technical
Service Department.
~
This equipment is not designed for
maritime use or for use in mobile
installations such as recreational
vehicles or aircraft.
~
Do not install the fridge/freezer in a
room with too low an ambient
temperature, e.g., a garage, as this
may lead to the appliance switching off
for longer periods so that it cannot
maintain the required temperature.
~
In refrigerators with an automatic ice
maker, avoid contact with the moving
parts of the ejector mechanism. Do not
place fingers or hands on the automatic
ice making mechanism while the
appliance is plugged in.
~
The ice cube maker is not suitable
for connection to a hot water supply.
~
Do not use water that is
microbiologically or chemically unsafe
or of unknown quality without adequate
disinfection or other treatment.
~
Defective parts must only be
exchanged with original Miele spare
parts. Only then can the safety of the
unit be guaranteed.
IMPORTANT SAFETY INSTRUCTIONS
5