Filter
Top Products
^ With a pencil, lightly mark a line down
the center of the inside of the custom
door.
^ Hang the fixing bracket d with the
mounting aids on the inside of the
custom door. Align the bracket
centrally.
^ Secure the fixing bracket with at least
6 screws e (4 x 14 mm). (For
framed doors, use only 4 screws at
the edge).
^
Carefully pull the mounting aids up
and out f.
^
Turn them around, and fit them into
the middle slots of the fixing bracket
g for safe keeping.
^ Hang the custom door on the
adjusting bolts h.
^ Loosely attached the nuts c onto the
adjusting bolts.
^ Close the door. Check the distance
between the custom door and
adjacent cabinetry doors.
^ Align the custom door with the
adjacent cabinetry doors:
Side adjustments X are achieved by
sliding the cabinetry door.
Height adjustments Y are achieved
by turning the adjustment bolts h
with a flathead screwdriver.
^
Tighten the nuts c.
Installing the appliance
54