Filter
Top Products
Installation
When using your appliance, follow
basic safety precautions including
the following:
Read all instructions before using
for the first time.
Be certain your appliance is
properly installed and grounded by
a qualified technician.
To guarantee the electrical safety
of this appliance; continuity must
exist between the appliance and an
effective grounding system. It is
imperative that this basic safety
requirement be met. If there is any
doubt, have the electrical system of the
house checked by a qualified
electrician. The manufacturer cannot be
held responsible for damages caused
by the lack or inadequacy of, an
effective grounding system.
Do not connect the appliance to
the main electrical supply using an
extension cord. Extension cords do not
meet the safety requirements of this
appliance.
Before servicing, disconnect the
power supply by either removing
the fuse, shutting off the power main, or
manually "tripping" the circuit breaker.
Correct usage
Do not operate the appliance until
it is properly installed in the
countertop.
This appliance is intended for
residential use only.
Use the appliance only for its
intended purpose. The
manufacturer cannot be held
responsible for damages caused by
improper use of the fryer.
Never use the appliance to warm
or heat the room.
Only use oils or fats that are
recommended for deep fryer use.
Never mix different types of oil and fat.
Turn on the fryer only after the lid is
removed and it is filled with oil or
water.
Do not switch on the appliance
when the heating element is raised
for cleaning.
Always lower the heating element
into the operating position when
the appliance is not in use.
This appliance must not be set up
or operated outdoors.
This equipment has not been
designed for maritime use or for
use in mobile installations such as
aircraft or recreational vehicles.
However, under certain circumstances
it may be possible for an installation in
these applications. Please contact the
nearest Miele Dealer or the Technical
Service Department with specific
requirements.
IMPORTANT SAFETY INSTRUCTIONS
4