Filter
Top Products
–
the shape and material of the
container.
^
Press the START button to start the
programme.
The interior lighting comes on.
A programme can only be started if the
door is closed.
Interrupting or re-starting a
programme
. . . To interrupt a programme:
^
Press the Stop/C button, or open the
appliance door.
The time stops counting down.
. . . To continue the programme:
^ Close the door and press START.
The programme continues.
Altering the settings
If you discover after starting a
programme that . .
. . . the microwave power level is too
high or too low, you can
^
select a new level.
. . . the time set is too short or too long,
you can
^
interrupt the programme (press the
Stop/C button once), use the time
selector to set a new time and
continue the programme (press the
START button).
To cancel a programme
^
Press the Stop/C button twice.
At the end of a programme
An audible tone will sound when the
programme is complete. The interior
lighting of the oven goes out.
^
If you want to stop the audible tone,
press any button.
Automatic warming function
The warming function will switch on
automatically for a maximum of
15 minutes, approx. 2 minutes after the
end of a cooking programme which
used at least 600 watts, providing that
the door remains closed and no buttons
are pressed.
H:H and h light up in the display. If the
turntable is engaged it will start turning.
If it was turned off during the cooking
process it will not come on.
Opening the door or pressing the
Stop/C button while the warming
function is in progress cancels the
function.
The warming function cannot be set as
a separate function.
Operation
25