Filter
Top Products
Building in
^ Push the appliance into the unit and
pull the cable with the plug through
the back of the unit.
^ Now align the appliance. If
necessary, use stoppers c supplied
to adjust the appliance so that it is
postioned horizontally. The stoppers
should be inserted as required into
the four holes on the base of the
appliance.
^
Connect the appliance to the
electricity supply.
^ Secure the appliance to the side
walls of the unit with screws a. Then
press cover caps b onto the screws.
The appliance must be built in
before it can be used. Otherwise it
poses an electric shock hazard.
Installation
55