Filter
Top Products
Switching off the refill indicators
If you only ever use combination
products containing salt and rinse aid
in your dishwasher, you can disable
both of these indicators if you wish.
^
Switch the dishwasher off using the
On/Off button K.
^
Press the programme selector button
X in, and whilst holding it in switch
the dishwasher on with the On/Off
button K.
Keep the programme selector button
X pressed in until the lower right
hand programme indicator comes
on.
If this does not happen, start the
procedure again from the beginning.
^ Press the Turbo button 9 times.
The Turbo indicator will flash briefly
nine times at intervals.
The characters flashing in the display
will show whether the refill indicators
are switched on or off.
–
"p1": the refill indicators are switched
on.
–
"p0": the refill indicators are
switched off.
^
If you want to change the setting,
press the programme selector button
X.
The setting is now stored in memory.
^
Switch the dishwasher off using the
On/Off button K.
If you switch to using detergent that
does not contain salt or rinse aid, it
is important to remember to
replenish the salt and rinse aid and
to switch the refill indicators back
on.
Before using for the first time
24