Filter
Top Products
Memory
You can use the Memory function to
save the last programme selected.
Instead of the ECO programme, the last
programme selected will appear in the
display when the dishwasher is
switched off and back on again at the
end of a programme.
^
Open the door.
^
Switch the dishwasher off using the
On/Off button K.
^
Press the programme selector button
X in, and whilst holding it in switch
the dishwasher on using the On/Off
button K.
Keep the programme selector button
X pressed in until the lower right
hand programme indicator comes
on.
If this does not happen, start the
procedure again from the beginning.
^ Press the Turbo button six times.
The Turbo indicator will flash briefly six
times at intervals.
The flashing sequence in the display
shows what the current setting is.
–
"p1": The Memory function is
activated.
–
"p0": The Memory function is
deactivated.
^
If you want to change the setting,
press the programme selector button
X.
The setting is now stored in memory.
^
Switch the dishwasher off using the
On/Off button K.
Additional functions
46