Filter
Top Products
Adjust Sensor wash
You can adjust the Sensor wash
programme so that it will remove
stubborn soiling in a lightly soiled load.
^
Open the door.
^
Switch the dishwasher off using the
On/Off button K.
^
Press the programme selector button
X in, and whilst holding it in switch
the dishwasher on using the On/Off
button K.
Keep the programme selector button
X pressed in until the lower right
hand programme indicator comes
on.
If this does not happen, start the
procedure again from the beginning.
^ Press the Turbo button five times.
The Turbo indicator will flash briefly five
times at intervals.
The flashing sequence in the display
shows what the current setting is.
–
"p1": The Adjust Sensor wash
function is activated.
–
"p0": The Adjust Sensor wash
function is deactivated.
^
If you want to change the setting,
press the programme selector button
X.
The setting is now stored in memory.
^
Switch the dishwasher off using the
On/Off button K.
Additional functions
45