Filter
Top Products
^
Open the door.
^
Switch the dishwasher on using the
On/Off button K.
The On/Off indicator light K will come
on.
^
Select the programme required with
the programme selector button.
^
Press the , button.
The last Delay start time used will
appear in the display. The , indicator
will light up.
^
Set the required time using the ,
button.
If the , button is kept pressed in, the
time will increase automatically up to
24^. To start at 30 minutes again, press
the , button twice.
^ Close the door.
The time starts counting down until the
programme start time: in 1 hour
increments for delay start periods of
over 10 hours, and in minutes for delay
start periods of under 10 hours.
At the end of the delay period, the
programme selected begins
automatically. The time left for a
programme to run then shows in the
display, the , indicator light goes out,
and the indicator light for the
programme selected comes on.
How the Delay start time is shown in
the time display:
up to 59 minutes:
e.g. 30 minutes = 30
between 1 hour and 9 hours 30
minutes:
e.g. 5 hours = 5.00
10 hours and over:
e.g. 15 hours = 15^
Starting a programme before the
delay start period has elapsed:
A programme can be started before the
delay start period has elapsed.
Proceed as follows:
^ Open the door.
^ Switch the dishwasher off using the
On/Off button K.
^ Switch the dishwasher on again with
the On/Off button K.
^ Select the programme required with
the programme selector button X.
^
Start the programme by closing the
door.
Additional functions
43