Filter
Top Products
36
IMPORTANT!
Two people will be required to carry out the
lifting procedure.
WARNING!
Do not attempt to lift this appliance by the
handle(s).
•
Each person should squat either side of the
appliance.
•
Tilt the appliance so that your hands can
support the underside of the appliance.
•
Keeping your back straight, raise the
appliance to the correct height by
straightening at the knees.
•
Rest the rear underside of the appliance on
the cabinet floor while your hands support
the front.
•
The appliance can be pushed fully into the
cabinet. Take care to avoid fouling the mains
lead.
•
Ensure the appliance is central and level.
•
Do not remove spacers fitted behind fixing
holes.
•
When the appliance is fully housed screw
the stability screws (supplied with the
appliance) into the side of the cabinet taking
care not to distort the side trims. It is
advisable to turn each screw alternatively to
avoid damaging the trims.
•
Switch on the appliance then refer to the
operating instructions.
Fixing points for stability
screws