Filter
Top Products
4
Installation Guide _____________
; Unpack and Place MD-1000HT
1. Compare the dishwasher and site utility connections.
2. Level the dishwasher by adjusting the bullet feet.
3. Raise the doors and check the door clearance to the ceiling.
4. Move the dishwasher to its permanent location.
Utility Connections - MD-1000HT
Power: 208-240V Single or Three Phase
Water supply: 3/4" NPT hot water supply (140°F/60°C minimum) for 40° F/22° C rise booster
(35 psi/241 KPa static pressure) 7-10 psi/63-69Kpa flow pressure
3/4" NPT hot water supply (110°F/43°C minimum) for 70° F/39° C rise booster
(35 psi/241 KPa static pressure) 7-10 psi/63-69Kpa flow pressure
Drain: 1-7/8" stainless steel, slip-fit hose connection
Max flow: 15 Us gal/min. (13.5 Imperial gal/min) 57liters/min.
Chemicals: Detergent and rinse-aid products are supplied by a chemical supplier
Note:
Installers must follow applicable sanitation, safety, plumbing, and electrical codes and
regulations; and work in accordance with best practices for dishwasher installation.
MD-1000HT • Unpack and Place