Timer (HD6109/HD6107 only)
B
You can also use the timer for other purposes, e.g.as a regular cooking timer.
Setting the timer
1 Press the timer button to set the frying time in minutes (fig.13).
- A few seconds after you have set the frying time,the timer will start counting down.
- While the timer is counting down,the remaining frying time blinks on the display.The last minute
is displayed in seconds.
- When the preset time has elapsed you will hear an audible signal.After 10 seconds the audible
signal will be repeated.You can stop the audible signal by pressing the timer button.
B
Note: you can erase the timer setting by pressing the timer button for 2 seconds (at the moment the
timer blinks) until '00' appears.
After frying
1 Fold out the handle of the basket (fig. 9).
2 Open the lid (fig.2).
Beware of the hot steam.
3 Remove the basket from the fryer and shake off excess oil or fat.
4 Put the fried food in a bowl containing grease-absorbing paper.
5 Enjoy the fried food!
If you want to fry another batch,wait until the temperature light has gone out.
6 Switch the fryer off by means of the on/off switch.
7 Unplug the appliance after use.
◗ If you do not use the fryer regularly,we advise you to remove the oil or liquid fat and to
store it in well-closed containers, preferably in the refrigerator or in a cool place.
Cleaning
Let the oil or fat cool down for at least 4 hours before cleaning or moving the fryer.
Do not use any abrasive (liquid) cleaning agents or materials (e.g scouring pads) to clean the
appliance.
Never immerse the fryer housing or the timer in water.
1 Open the lid (fig.2).
2 Remove the lid by pulling it upwards (fig.14).
3 Lift the frying basket out of the fryer (fig.10).
4 Pour out the oil or fat (fig.15).
PreClean function
This appliance is equipped with a PreClean function, which offers you the possibility to soak the
inner bowl with hot water and washing-up liquid to allow easier cleaning.
Make sure the oil or fat has been removed from the inner bowl before you use this function.
ENGLISH8