Filter
Top Products
5
The Wok cradle
The Wok cradle is designed to fi t a Typhoon™ Professional
35cm Wok (Part Code 13840S)
This is available from leading retailers.
If you use a diff erent Wok make sure that it fi ts the cradle.
Woks vary very widely in size and shape. It’s important
that the Wok sits down on the pan support - but if the
Wok is too small the cradle will not support it properly.
The cradle should be used on the triple ring Wok burner
only.
When you fi t the cradle check that the Wok is properly
located on the front and rear fi ngers and that it is
supported properly on a pan support.
Make sure the cradle is stable and that the Wok is sitting
level in the ring.
The cradle will get very hot in use - allow plenty of time
for it to cool before you pick it up.
Care and Cleaning
Essential information
Never use paint solvents, washing soda, caustic
cleaners, biological powders, bleach, chlorine based
bleach cleaners, coarse abrasives or salt.
Recommended cleaning materials are hot soapy
water, a moistened soap pad, cream cleaner or a
nylon scourer.