Filter
Top Products
TO SET A CLEAN CYCLE
The self-cleaning cycle is preprogrammed for 3%
hours. You can also set the electronic range control for
a delayed start of the clean cycle. During the clean cy-
cle a LO blower setting is recommended.
TO STOP A CLEAN CYCLE:
1. Press the OVEN/OFF button.
2. Wait until the oven has cooled below locking
temperature (20-30 minutes).
3. Slide the door lock handle left to unlock the door. If
the door lock handle does not move easily, wait a
few more minutes, then try again. You will not be
able to unlock the oven unless the oven tempera-
ture is below 45OOF. Never force the door lock
handle.
WHEN A CLEAN CYCLE IS FINISHED.
To self-clean:
1. Slide the door lock handle to the right. You may
need to press the door slightly to get it to lock pro-
perly.
Never try to force the door lock handle. Forcing the
handle may damage the door locking mechanism.
2. Push CLEAN button.
1. Wait until the oven has cooled below locking
temperature (20-30 minutes).
2. Slide the door lock/handle left to unlock the door. If
the door lock handle does not move easily, wait a
few more minutes, then try again. You will not be
able to unlock the oven unless the oven
temperature is at a safe level. Never force the door
lock handle.
You can find out when the clean cycle will be finished
by pushing the STOP TIME button.
AFTER A CLEAN CYCLE
To use delayed self-clean:
1. Push STOP TIME button.
2. Turn SET knob to time of day when you wish clean-
ing to be completed (must be more then 3% hours
later than current time of day).
3. Slide the door lock handle to the right. You may
need to press the door slightly to get it to lock pro-
perly. Never try to force the door lock handle. Forc-
ing the handle may damage the door locking
mechanism.
After a clean cycle, you may notice some white ash in
the oven. Just wipe it up with a damp cloth.
If white spots remain, remove them with a soap-filled
steel wool pad. These deposits are usually a salt
residue that can not be removed by the clean cycle.
If the oven is not clean after one clean cycle, the cycle
may be repeated.
4. Push CLEAN button.
27