Filter
Top Products
20 IPG User’s Guide 717865 Rev B
Using Parental Control, Continued
Blocking and Unblocking Channels Using General Settings
Perform the following steps to select channels that you want to block.
1. Press the SETTINGS key twice.
2. At the General Settings menu, press the UP or DOWN keys to highlight
Block: Channels; then, press the SELECT key.
3. Enter your Parental Control Blocking PIN, if required.
4. Press the UP or DOWN arrow keys to highlight each channel you want to block.
Note: Some cable service providers allow you to select the channel number using the numeric
keys on your remote control.
5. Press the SELECT key.
Result: The channel ID is listed in the
column on the right and a padlock
appears in the Channels list by each
channel you select.
Note: You can press the SELECT key
again to unblock the channel.
6. Continue highlighting and selecting the
channels you want to block.
7. When all channels that you want to block
have a padlock shown, press the A key to
accept.
Note: Blocks do not take effect until you turn on the Parental Control feature.
8. To turn on and turn off the Parental Control feature, follow the instructions in How
To Turn On or Turn Off Parental Control.
9. Press the EXIT key to return to watching TV.
Blocking and Unblocking Channels Using Quick Settings
Perform the following steps to block or unblock the channel you are watching.
Note: Your cable service provider may not offer
this feature.
1. Press the SETTINGS key once to display the
Quick Settings menu.
2. Press the UP or DOWN arrows to highlight Block
this Channel or Unblock this Channel.
3. Press the SELECT key.