Filter
Top Products
22 IPG User’s Guide 717865 Rev B
Using Parental Control, Continued
Blocking Programs by Time of Day
You can block programs in a particular time range, for a single day, a range of days, or a
day of the week such as every Saturday. You can set up blocks by time of day for a
maximum of 14 days in the future.
1. Press the SETTINGS key twice.
2. At the General Settings menu, press the UP or DOWN keys to
highlight Block: Time New; then, press the SELECT key.
3. Enter your Parental Control Blocking PIN, if required.
4. Press the UP or DOWN arrows to highlight the date you want to block, then press
the SELECT key.
5. In the START column, change the
time shown to the time you want
the block to start as follows:
a. Press the RIGHT or LEFT
arrows to highlight a setting.
b. Press the UP or DOWN
arrows to change each setting.
Note: Some cable service
providers allow you to enter
the time using the numeric
keys on your remote control.
c. When the correct START time
is shown, press the SELECT
key.
6. In the STOP column, change the time shown to the time you want the
block to end:
a. Press the RIGHT or LEFT arrows to highlight the setting to change.
b. Press the UP or DOWN arrows to change each setting.
c. When the correct STOP time is shown, press the A key to accept.
7. Press the EXIT key to return to watching TV.
Note: To clear a blocked time, highlight the Block: Time # (the # symbol represents the
number of the time period you want to clear); then, press the C key.