Sharp R-820BK Microwave Oven User Manual


 
Beforeoperatingyournewmicrowaveovenmake
sureyoureadandunderstandthis operation
manualcompletely.
. Before the oven can be used, follow these
procedures:
1. Plug in the oven. Close the door. The oven display
will show SHfiRPSIRPL_u,THEBESTPRESSL-LERRRI'IO
PRESS ELOEH.
2. Touch the Stop/Clear pad.
will appear.
3. Set clock.
TO SET THE CLOCK
. Suppose you want to enter the correct time of day
12:30 (A.M. or P.M.).
Touch Clock pad.
Enter the CorreCt iime ! _ * __l LI
of day by touching the
numbers in sequence.
3 i I' -'
,c.:0u
Touch Clock pad again.
This is a 12 hour clock. If you attempt to enter an
incorrect clock time, ERRORwill appear in the display.
Touch the Stop/Clear pad and re-enter the time.
. If the electrical power supply to your microwave
oven should be interrupted, the display will inter-
mittently show SBfiRF'SlfiPLEITHEBESTPRESSELEfiR
fil'lOPRESSELBEHafter the power is reinstated. If this
occurs during cooking, the program will be erased.
The time of day will also be erased. Simply touch
Stop/Clear pad and reset the clock for the correct
time of day.
NOTE." Your oven can be programmed with the
door open except for Start/Touch On and
Minute Plus.
STOP/CLEAR
Touch the Stop/Clear pad to:
1. Erase if you make a mistake during programming.
2. Cancel kitchen timer.
3. Stop the oven temporarily during cooking.
4. Return the time of day to the display.
5. Cancel a program during cooking, touch twice.
MICROWAVE COOKING
Your oven can be programmed for 99 minutes 99 sec-
onds (99.99). Always enter the seconds after the min-
utes, even if they are both zeros.
Suppose you want to cook for 5 minutes at 100%.
t @
I--I I--I
. U U
Enter cooking time.
[ STA.T 1 r ,-,,-, lj
-- | TOUCH ON I 21
Touch Start/
Touch On pad.
There are eleven preset power levels.
Using lower power levels increases the cooking time
which is recommended for foods such as cheese, milk
and long slow cooking of meats. Consult cookbook or
recipes for specific recommendations.
Power Level 100% High
9 90%
8 80%
7 70%
6 60%
5 50% Medium
4 40%
3 30% Med
2 20°o
t 10% Low
0 O%
You can program up to 4 automatic cooking sequences.
Follow directions on page 21. Note that Power Level must
be entered first when programming multiple sequences.