Filter
Top Products
UTRER CUHVEHIEHT FEATURES
MANUAL DEFROST
]f the food that you wish to defrost is not listed on the
CompuDefrost Chart or isabove or below the limitsin the
"Amount" column on the CompuDefrost Chart, you need to
defrost manually.
You can defrost any frozen food, either raw or previously
cooked, by using Power Level 3. Follow the exact 3-step
procedure found under Time Cooking on page 9. Estimate
defrosting time and press 3 for 30% when you select the
power level.
For either raw or previously cooked frozen food the rule of
thumb isapproximately 5 minutes per pound. For example,
defrost 5 minutes for 1 pound of frozen spaghetti sauce.
Always stop the oven periodically to remove or separate
the portions that are defrosted. If food is not defrosted at
the end of the estimated defrosting time, program the oven
in 1 minute increments on Power Level 3 until totally de-
frosted.
When using plastic containers from the freezer, defrost only
long enough to remove from the plastic in order to place in
a microwave-safe dish.
TOUCH ON
Touch On allows you to cook at 100% power by
touching the Start/Touch On continuously. Touch On is
ideal for melting cheese, bringing milk to just below
boiling etc. The maximum cooking time is 3 minutes.
,, Suppose you want to melt cheese on a piece
of toast.
"1 I ;.
4 Continuously touch Start/ I START ]
! Touch On pad, Thecooking [ TOUCHON
J
time wi!! begin counting
,e_ When the Cheese is melted to desired degree
L remove finger from StarVTouch on pad,
Oven stops immediately:
NC)TE:
1. Note time it takes for frequently cooked foods and
program that time in the future.
2. Touch Start/Touch On pad within 1 minute after cook-
ing, opening and closing the door or touching the
Stop/Clear pad.
3. Touch On can only be used 3 times in a row. If more
times are needed, open and close door or touch
Stop/Clear.
MULTIPLE SEQUENCE
COOKING
Your oven can be programmed for up to 4 automatic
cooking sequences for the microwave mode and 2 au-
tomatic cooking seaquences for convection, grill and
roast mode, switching from one power level setting to
another automatically.
Sometimes cooking directions tell you to start on one
power level and then change to a different power
level. Your oven can do this automatically.
21
• Suppose you want to cook roast beef for 5 minutes
at 100% and then continue to cook for 30 minutes
at 50%.
First touch Power Level
'1 pad twice for 100%
x 2
power
Then enter cooking time. [_ ["_ FG]
'°°ch °wer'eve'0 'I
2 Touch number pad 5 for POWER
LEVEL
50% power.
Then enter second
cooking time. [_ [_ [-0"] [_
3 Touch Start START
I
Touch On pad. TOUCH ON I
NC)TE:
1. If Power Level pad is touched twice, HIGH POWER
will be displayed.
2. If 100% is selected as the final sequence, it is not
necessary to touch the Power Level pad.
3. If you wish to know power level, simply touch the
Power Level pad. As long as your finger is touching
the Power Level pad, the power level will be
displayed.
4. Convection settings with preheat ( No.l, 3, 4 and 5 )
cannot be programmed for multiple sequence cook-
ing.
MORE OR LESS TIME
AD#USTMENT
Should you discover that you like any of Special Fea-
tures settings slightly more done, touch the Power
Level pad once after touching your choice of pads and
before touching the Start/Touch On pad.
The display will show MORE.
Should you discover that you like any of Special Fea-
tures settings slightly less done, touch the Power Level
pad twice after touching your choice of pads and be-
fore touching the Start/Touch On pad.
The display will show LESS.