Filter
Top Products
17
NO.
12 Enter power level for memory 2.
14 Press the STOP/CLEAR pad to exit.
NOTES:
1. Press the SET MEMORY pad twice within 2 seconds.
2. If the programmed cooking time is over the maximum
time, the display will show error code EE9. To clear the
error code, press the STOP/CLEAR pad and re-programme.
See Maximum Cooking Time on page 19.
3. It is not necessary to press the POWER LEVEL pad for
100% in Single Stage.
2. Programming Multi Stage Cooking
* Suppose you want to set 4 minutes at 60% for the 1st stage
and 2 minutes at 30% for the 2nd stage with memory 2
using of Dual Digit Input.
1 Press the SET MEMORY pad
twice within 2 seconds.
2 Enter the memory number.
3 Press the MANUAL/REPEAT pad.
4 Enter cooking time for 1st stage.
NO.
NO.
5 Press the POWER LEVEL pad.
Procedure Display
13 Press the SET MEMORY pad to
save memory 2.
Procedure Display
6 Enter power level for 1st stage.
NOTES:
1. Press the SET MEMORY pad twice within 2 seconds.
2. If the programmed cooking time is over the maximum
time, the display will show error code EE9. To clear the
error code, press the STOP/CLEAR pad and re-programme.
See Maximum Cooking Time on page 19.
3. It is not necessary to press the POWER LEVEL pad for
100% in the last stage in Multi Stage Cooking.
11 Press the SET MEMORY pad to
save memory.
12 Press the STOP/CLEAR pad to exit.
NO.
9 Press the POWER LEVEL pad.
10 Enter power level for 2nd stage.
8 Enter cooking time for 2nd stage.
7 Press the MANUAL/REPEAT pad.
Procedure Display
X 2
3
02
6
2 0 0
4 00
3
R-1900J [EN].indd Sec1:17R-1900J [EN].indd Sec1:17 4/28/09 10:01:28 AM4/28/09 10:01:28 AM