Instructions for the user
ribed
in point 10.2.1;
he retainer to
the right (as shown in the adjacent
diagram);
10.2.2 Barbecue drip tray
To remove the drip tray under the
barbecue element:
1. Remove the griddle as desc
2. Raise the heating element and fix
it in place by sliding t
3. Remove the drip tray using the
two handles and clean using
specific detergents for stainless
steel and a non-abrasive sponge.
10.2.3 Grids
s (griddle + fish burner) as shown in the
nd pan
in warm water and non-abrasive detergent,
ide pa
Remove the right-hand pan stand
diagram. There is no special order for removal of the left-ha
stands. Clean the pan stands
taking care to remove all deposits. Replace, fitting first the outs
stand then the griddle.
n
10.2.4 Burner caps, flame cap crowns and
The burner caps, flame cap crowns and bu
extractable to facilitate
burners
rners are
cleaning. Wash them with hot
water and non-abrasive detergent, taking care to
move incrustation, and leave them to dry
completely. Reassemble the burner caps on their
crowns, ensuring that niches A are centred with
burner pins B.
re
35