Sunbeam EM8910 Espresso Maker User Manual


 
11
Heading
Tip: To ensure a quality coffee, change the
water in the water reservoir daily and wash
the reservoir at least once a week in hot
soapy water and rinse thoroughly.
Immediately after being switched on the
machine runs through a set-up cycle. The
noises occuring are perfectly normal.
During the heating up procedure the
temperature indicator flashes.
LCD: Indicates briefly
<<HEATING PLEASE WAIT>>
When the operating temperature is
reached, the temperature indicator will
stop flashing and remain a constant light.
See figure 9.
After the operating temperature has been
reached, the espresso machine performs an
automatic rinsing cycle. This removes any
old coffee grinds from the coffee brewing
unit.
LCD: Indicates briefly
<<RINSING PLEASE WAIT>>
The water flows into the drip tray. The
temperature indicator light is constant.
The espresso machine is now ready for
operation.
LCD: The indication on the display will
depend on the last selected coffee setting.
Switching off the machine
Switch the machine off by pressing the
'POWER' button on the control panel.
The machine performs a rinsing cycle.
LCD: Indicates briefly
<<RINSING PLEASE WAIT>>
At the end of the rinse cycle the display
intermittenly flashes
<<UNIT SHUTTING DOWN>> and
<<EMPTY WASTE CONTAINER>>.
The machine switches off automatically
after 60 seconds.
Using the Sunbeam Intuitive Digital (continued)
Figure 9