Sunbeam EM8910 Espresso Maker User Manual


 
18
Note: In the coffee making process, the
ground coffee is dampened by a small
amount of water. Known as pre-infusion,
this helps in achieving maximum extraction
of oils from the coffee grinds. Following
a short pause, the actual brewing process
commences.
Note: You may stop the pour of coffee at any
time by briefly pressing the "OK" button.
LCD: Indicates
<<CANCELLED PLEASE WAIT>>.
Note: If you have not dispensed coffee for
a long period of time with the espresso
machine switched on, you should rinse the
brewing system before dispensing again.
Start the rinsing process by pressing the
'RINSE" button See figure 25.
LCD: Indicates
<<RINSING PLEASE WAIT>>.
With this additional rinsing phase the
brewing unit is brought back to the initial
operating temperature.
Making an espresso with pre-ground coffee (continued)
Figure 25