Filter
Top Products
34
• Dry the coffee brewing unit and turn the
service lever upwards again as far as it will
go. The ejection lever folds back again and
the brewing unit closes. See figure 55.
Inserting the coffee brewing unit
• Re-insert the coffee brewing unit as
follows:
1. Place the coffee brewing unit onto the
guide bar and push the coffee brewing unit
into the machine as far as it will go, see
figure 56.
2. Press the locking button down and push
the coffee brewing unit further in for
approximately 1cm until the locking
button clicks into place, see figure 57.
3. Press the locking lever down as far as it
will go, see figure 57.
• Close the service door and re-insert the
coffee waste container.
Note: The Sunbeam Intuitive Digital can only
be switched on if the service door is closed.
After switching on, the coffee brewing unit
re-adjusts itself, the normal heating process
starts again.
Figure 52
Figure 53
Figure 50
Figure 51
1
2
3
Cleaning the coffee brewing unit (continued)