Sunbeam WW7500D Wok User Manual


  Open as PDF
of 24
 
6
Using your Professional Wok
Before First Use
Ensureanystickersareremovedfromthe
product.Washinwarmsoapywater,rinse
thoroughlyanddryyourwokandlid.
Do not immerse the heat control probe in water
or any other liquid.
1.Inserttheheatcontrolprobeintothe
socketofthewok.
2.Plugthecordintoa230-240Vpower
outletandturnthepoweron.
3.Settheheatcontrolprobedialtothe
desiredtemperaturesetting,orthe
recommendedtemperaturesettingforyour
requiredrecipe.
Allow5minutesforyourwoktoreachthe
temperaturesettingyouhaveselected.The
wokisnowreadytouse.
Note: Thethermostatlightontheheatcontrol
probeindicatesthetemperatureatwhichthe
dialisset.
Thislightwillremainonuntiltheset
temperaturehasbeenreachedandthenwill
cycleonandoffthroughoutcooking.Thiswill
ensurethatthewokmaintainsthecorrect
temperature.
Detachable Cook & Clean Base
YourSunbeamProfessionalWokfeaturesa
quickreleasedetachable'cook&clean'base.
Thisspringloadedmechanismenablesthe
basetobequicklyandeasilyremovedfrom
thewokcookingvessel.
Simplyturnthewokupsidedownandturn
thereleasedialanti-clockwiseasshownin
theillustrationbelow.
Quick-release 'cook and clean' base
 previous next