Filter
Top Products
16
Model 220Operating Procedures
140717
Figure 25
Step 5
Place the control switch in the “EJECT” position. This
will cause the sanitizing solution in the freezing
cylinder to be agitated. Allow to agitate for five
minutes.
Figure 26
Step 6
Place the control switch in the “OFF” position.
With an empty pail beneath the ejec tion port, turn the
draw rod handle andpull forward, opening the ejection
port. Draw off all the sanitizing solution. When the
sanitizer stops flowing from the ejection port, push the
draw rod back into the valve body and lock into place.
Figure 27
Step 7
Assemble the hopper gasket around the top edge of
the mix hopper.
Figure 28