Filter
Top Products
19
Model 428 Operati ng Procedures
Step B -- Self--Closi ng Door Assembly
Insert the draw valve into the door.
Figure 23
Step C -- Self--Closi ng Door Assembly
Rotate the draw valve so the groove on the top of
the draw valve is perpendicular to the door face.
Figure 24
Step D -- Self--Closi ng Door Assembly
Insert the ice buster thr ough the door spout and into
the slot located just above the lower o--ring.
Figure 25
Step E -- Self--Closing Door Assembly
With the ice buster in place, rotate the draw valve to
allow inst allation of the draw handle. This will lock
the ice buster in place. With the draw handle in
place, install the draw handle pin. Close the draw
valve by moving the handle to the left.
Figure 26
Step F -- Sel f--Clo sing Door Assembly
Install the draw valve spring, draw switc h cap
plunger, and cap.
Figure 27