Filter
Top Products
21
Model 428 Operati ng Procedures
050415
Step L -- Sel f--Clo sing Door Assembly
Position the tor que arm by insert ing it down into the
hole on the torque rotor which protrudes from the
door. Verify proper installation by moving the tor que
rotor back and forth to be sure it moves freely.
Figure 33
Proceed to Step 16.
Step 16
Slide the long drip pan into the hole in the front panel.
Figure 34
Step 17
Install the front drip tray and splash shield beneaththe
door spout.
Figure 35
Step 18
With sanitized hands, or a plastic sanitized glove, lay
the air/ mix feed tube(optional) in the bottom of the mix
hopper.
Figure 36