Filter
Top Products
28
Model C043Operating Procedures
Step 5
Open the d raw arm plate and turn the flow
adjustment knob to “5”. Run the remaining mix
through the freezing cylinder and properly dispose of
the mix.
Figure 58
Note: If local health codes permit the use of
rerun, place a sanitized, NSF approved rerun
container beneath the opening of the front plate and
run the remaining mix into the container. See
page 36 for instructions regarding the p roper use o f
rerun.
Step 6
After all the custard has drained from the hopper,
remove the hopper cover, the flow control rod and
the feed tube.
Figure 59
Step 7
Repeat these steps for the remaining freezing
cylinders.
Rinsing
Step 1
Place the hopper refrigeration switch in the “OFF”
position.
Figure 60
Step 2
Make sure the refrigeration switch is in the “OFF”
position.
Figure 61