Filter
Top Products
38
Model C043Important: Operator Checklist
Section 8 Troubleshooting Guide
PROBLEM PROBABLE CAUSE REMEDY PAGE
REF.
1. The product is too stiff. a. Flow rate is too slow. a. Adjust the flow rate.
21
2. The scraper blades make
a chattering noise.
a. Flow rate is too slow. a. Adjust the flow rate.
21
3. The product is too soft. a. Flow rate is too fast. a. Adjust the flow rate.
21
b. There is a problem with
the refrigeration system.
b. Call an authorized service
technician.
---
4. The mix low indicator is
illuminated.
a. Inadequate level of mix in
the mix hopper.
a. Fill the mix hopper with
mix.
21
b. Bad electrical connection. b. Call an authorized service
technician.
---
5. The mix low indicator is
illuminated and the
product is too stiff.
a. The level of mix in the mix
hopper is inadequate and
the flow rate is too slow.
a. Fill the hopper with mix if
further production is
required. If no further
production is required,
open the flow control all
the way and place the
refrigeration switch in the
“OFF” position.
21 / 23
6. B eater motor won't start. a. The beater motor overload
has tripped.
a. Turn the machine off.
Press the reset button and
restart the machine.
---
b. The power switch is in the
OFF position.
b. Place the power switch in
the ON position.
---
c. The beater motor switch is
in the OFF position.
c. Place the beater motor
switch in the ON position.
---
d. The circuit breaker is off
or the fuse is blown.
d. Turn the b reaker on, or
replace the fuse.
---