Filter
Top Products
29
Model C043 Operating Procedures
Step 3
Close the draw arm plate and remove the p roduct
chute.
Figure 62
Step 4
Install the splash guard.
Figure 63
Step 5
With a pail beneath the draw arm plate, pour four
gallons (15 liters) of cool, clean water into the
hopper. (Note: Use the faucet if the machine is
equipped with one.)
Figure 64
Step 6
With the brushes provided, scrub the mix hopper.
Figure 65
Step 7
Place the beater switch in the “ON” position.
Figure 66