Taylor custard machine Blender User Manual


 
24
Model C043Operating Procedures
120213
Step 3
On the front half of the hoppers, install the hopper
covers that have the raised lip.
Figure 43
Step 4
Fill the hopper with lemon ice mixture.
Note: Use only FRESH MIX when priming the
freezer.
Step 5
On the back half of the hoppers, install the hopper
covers that have the concave lip. For maximum
capacity, the hopper should be full.
Figure 44
Step 6
Turn the flow adjustment knob to “1” and set the
timer for one minute.
Note: Whenever adjustments are made, always
turn the adjustment knob all the way to “5” and then
back to the desired number.
Figure 45
Step 7
After one minute has expired, place the beater and
refrigeration switches in the ON position and set the
timer for three minutes.
Figure 46
Step 8
After three minutes have expired, open the draw
arm plate to check for proper frozen lemon ice
consistency. If the lemon ice is too soft, close the
draw arm plate for 20 to 30 seconds and repeat.