Filter
Top Products
31
Model C043 Operating Procedures
Rinsing
Step 1
Place the hopper refrigeration switch in the “OFF”
position.
Figure 71
Step 2
Make sure the refrigeration switch is in the “OFF”
position.
Figure 72
Step 3
Close the draw arm plate and remove the product
chute.
Figure 73
Step 4
Install the splash guard.
Figure 74
Step 5
With a pail beneath the draw arm plate, pour four
gallons (15 liters) of cool, clean water into the
hopper. (Note: Use the faucet if the machine is
equipped with one.)
Figure 75