Filter
Top Products
28
Model C043Operating Procedures
120213
Resuming Production During
Operation
Step 1
Place the beater switch in the “ON” position.
Figure 59
Step 2
Place the refrigeration switch in the “ON” position.
Figure 60
Step 3
Set the timer for one minute. After the minute
expires, open the flow control assembly to “1” and
set the timer for three minutes.
Note: Whenever an adjustment is made, first turn
the adjustment knob all the way to “5” and then back
to the desired number.
Figure 61
Step 4
After three minutes have expired, open the draw
arm plate. If the custard is too soft, close the draw
arm plate and wait one minute. Repeat as
necessary.
Figure 62