Filter
Top Products
English 12
Step 5: Installing Anti-Tip Device
WARNING — RANGE TIPPING
HAZARD:
• To prevent accidental tipping of the range, attach it to
the floor by installing the Anti-Tip Device supplied.
• A risk of tip-over may exist and injury can result if the
appliance is not installed in accordance with these
instructions. For all ranges an anti-tip device must be
installed as per these instructions.
• If the range is pulled away from the wall for cleaning,
service or for any other reason, ensure that the Anti-
Tip Device is properly re-engaged when the range is
pushed back against the wall. In the event of abnormal
usage (such as a person standing, sitting, or leaning
on an open door), failure to take this precaution can
result in tipping of the range. Personal injury might
result from spilled hot liquids or from the range itself.
WARNING — ELECRICAL SHOCK
HAZARD:
• Use extreme caution when drilling holes into
the wall or floor as there may be concealed
electrical wires.
• Identify the electrical circuits that could be
affected by the installation of the Anti-Tip Device,
then turn off power to these circuits.
• Failure to follow these instructions may result
in electrical shock or other personal injury.
ATTENTION — PROPERTY DAMAGE:
• Contact a qualified installer or contractor to determine the
proper method for drilling holes through the wall or floor
material (such as ceramic tile, hardwood, etc.)
• Do not slide the range across an unprotected floor.
• Failure to follow these instructions may result in damage
to wall or floor coverings.
Tools Needed for Installation of Anti-Tip
Device:
• Screwdriver, Phillips
• Drill, electric or hand
• Measuring tape or ruler
• 1/8” (3.17mm) drill bit (wood or metal; wall or floor)
• 3/16” (4.76mm) carbide-tipped masonry drill bit (concrete
or concrete block wall or floor)
• 3/16” (4.76mm) anchors, drywall or concrete, 4 each (not
required if mounting bracket is being attached to solid
wood or metal)
• Hammer
• Pencil or other marker
WARNING
--A child or adult can tip the range and
be killed.
--Verify the anti-tip device has been
properly installed and engaged as per
installation instructions.
--Ensure the anti-tip device is re-
engaged when the range is moved.
--Do not operate the range without the
anti-tip device in place and engaged.
--Failure to do so can result in death or
serious burns to children or adults.
--See further Installation Instructions.
THERMADOR
Service Part No.
Qty Description
415078 4
Screw, Phillips, #10 x 1
1
/
2
”
(38.1mm)
655355 1 Anti-Tip Bracket