Filter
Top Products
RLC-PRC016-EN10
Close Spacing Of Chiller
The air-cooled Series R
™
chiller has the
tightest recommended side clearance in
the industry, four feet, but that is not all.
In situations where equipment must be
installed with less clearance than
recommended, such as frequently
occurs in retrofit and rooftop
applications, restricted air flow is
common. Conventional chillers may not
work at all. However, the air-cooled
Series R
™
chiller with Adaptive Control
™
microprocessor will simply make as
much chilled water as it can given the
actual installed conditions, stay on line
during any unforeseen abnormal
conditions, and optimize its
performance. Consult your Trane sales
engineer for more details.
Lower Service Expense
Nuisance service calls are avoided.
When there is a real problem that must
be corrected, the UCM’s extensive
diagnostics help assure that the problem
is quickly identified. Down time and
service expense are minimized. And with
the ability to communicate with the
Trane Integrated Comfort
™
system or a
remote display panel, service problems
can be identified and diagnosed remote
to the installation.
Factory Testing Means Trouble-Free
Start-Up
All air-cooled Series R
™
chillers are given
a complete functional test at the factory.
This computer-based test program
completely checks the sensors, wiring,
electrical components, microprocessor
function, communication capability,
expansion valve performance and fans.
In addition, each compressor is run
tested to verify capacity and power
consumption. The end result of this test
program is that the chiller arrives at the
jobsite fully tested and ready to go to
work.
Factory Installed And Tested Controls/
Options Speed Installation
All Series R
™
chiller options, including
control power transformer, starter
disconnect, low ambient control,
ambient temperature sensor, low
ambient lockout, communication
interface and ice making controls are
factory installed and tested. Some
manufacturers send options in pieces to
be field installed. With Trane, the
customer saves on installation expense
and has assurance that ALL chiller
controls/options have been tested and
will function as expected.
Features and
Benefits