Filter
Top Products
SDSFE31xx-100 Industrial Device Server Transition Networks
24-Hour Technical Support: 1-800-260-1312 International: 00-1-952-941-7600
19
DIP Switches
DIP switch
position
descriptions
The Device Server features four DIP switches on the top panel that set the responds
for the alarm in case of power loss or link failure. Figure 14 shows the DIP switch
and a chart that explains each setting.
No Description Default
1
Primary power alarm
(enable ON, disable OFF)
OFF
2
Redundant power alarm
(enable ON disable OFF)
OFF
3
Fiber port alarm
(enable ON disable OFF)
OFF
4
N/A
OFF
Figure 14: Dip Switch Settings and Explanations
Note: DIP switch changes will not become active until the Device Server is power
cycled (turned OFF then ON).