Filter
Top Products
SDSFE31xx-100 Industrial Device Server Transition Networks
24-Hour Technical Support: 1-800-260-1312 International: 00-1-952-941-7600
39
Configuration software, continued
IP trap
manager
submenu
Click the “IP Trap Manager
” link to launch the IP Trap manager submenu option,
shown in Figure 40.
Figure 40: IP Trap Manager Option display
Table 2 describes the fields on the IP Trap Manager display.
Table 2: IP Trap Parameters and Descriptions
Parameter Description
IP Address Enter the IP address(s) of the terminal(s) that you want to
monitor for failures. When a failure occurs, an alarm will be
sent if enabled. Enter their community names and disable or
enable their alarm function accordingly.
Community Name SNMP community names.
Status Alarm function: disabled or enabled.
Continued on next page