Transition Networks SDSFE31XX-100 Cooktop User Manual


 
Transition Networks SDSFE31xx-100 Industrial Device Server
24-Hour Technical Support: 1-800-260-1312 International: 00-1-952-941-7600
34
Configuration software, continued
FW upgrade via HTTP (continued)
When the firmware upgrade is complete, the index page (system information) will
appear, as shown in Figure 30.
Figure 30: Index Page (System information) Display
Click the serial port config link to modify the configuration, based on the new
firmware.
FW upgrade
via TFTP
Note: The firmware file must be stored on the TFTP server before upgrading by this
method can occur.
To upgrade the via TFTP server, do the following:
Step Action
1. Enter the IP address the TFTP server field, as shown in Figure 31.
Figure 31: TFTP Upgrade Submenu Display
2. Enter the file name in the file name field, as shown in Figure 31 above.
Continued on next page
192 168 0 155
TRANS_601_V122.b