Filter
Top Products
4. Select desired programmed setting by pressing any of the Pre-Set
Buttons one through six. The machine will begin immediately to cycle
through the selected program, and turn off when the program is complete.
Each button has a different pre-selected combination of speed and length
for blending.
NOTE: If you detect a change in the sound of the machine or if a hard or
foreign object comes into contact with the blades, do not serve the drink.
Inspect your blade assembly for loose, knicked or missing parts. If parts are
loose, missing or knicked replace with a new blade assembly. (See page 17).
5. Once one of the six PRE-SET PROGRAM buttons is pushed the machine
will start and stop automatically. By pressing another PRE-SET BUTTON
or the START/STOP button, the machine will stop the blending cycle.
6. During any of the blending cycles, by pressing the PULSE H button the
speed of the blending can increase up to 100% of the motor speed. By
pressing the PULSE L button during a blending cycle the speed of the
motor can be decreased down to 7%. Once released the motor speed
will revert back to the blending cycle of the PRE-SET PROGRAM.
(NOTE: Use the SPEED CONTROL buttons to set the speed of the PULSE
buttons. For example, when the H or L PULSE button is pressed and held,
by simultaneously pressing and holding the ▲ or ▼ SPEED CONTROL button
the motor speed will increase or decrease in 1% increments. When the SPEED
CONTROL button is released, the PULSE button will remain set at the selected
speed until altered with the SPEED CONTROL buttons.
7. When the cycle is complete the blender stops, wait until blade comes
to a complete stop before removing the lid and/or container from the
motor base.
8. Remove the container, pour, garnish and serve the drink.
How to operate your Blending Station
®
using the
Start/Stop and Speed Control button.
Although using the PRE-SET PROGRAMMED buttons is highly recommended
for the best drink, occasionally a drink may need special attention. By using
the START/STOP button and the SPEED CONTROL button you can manually
control the speed of the Blending Station.
15
CONTINUED ON PAGE 16