Filter
Top Products
Tamper
One Piece Lid
(optional)
64 oz. polycarbonate container
The one piece lid is easy to clean and easy to put
on and take off.
(Note: Brand new lids are a little stiff. This is temporary.)
• There is no latch on this lid.
• Add ingredients through port on top.
CAUTION: Do not use non-latching lid when processing hot ingredients.
Cover with Removable Hinge Design
Cover Door:
• The cover door can be removed by opening it until the curved bottom
of the cover and the back cover form a 90˚ angle. Then lift straight up.
(Figure D)
• To reinstall the cover door, align the hinge opening with the hinge on
the back cover and slide the two together.
Back Cover:
• The back cover can be removed by loosening the two screws in the
back of the machine. Then lightly tap or pull the back cover toward
the front of the machine until it loosens from the grooves on the base.
(Figure E)
• To reinstall the back cover slide on to the base until latched in place.
Reinstall screws.
• The back cover should only be removed if in need of replacement.
Figure C
Figure D
Figure E
Back Cover
Back Cover
9