Vita-Mix 120 VAC Models Blender User Manual


 
14. WARNING: When processing hot liquids:
The 2-part latching lid must be securely in place. This allows steam
to escape naturally, and will prevent the lid from coming off when
the machine is turned on.
Use caution with hot liquids. Spraying from under the lid plug can
occur, or escaping steam may cause scalding.
Do not process hot liquids with the non-latching lid.
15. Display window area will scratch when contacted with a scouring pad or
sharp object. Use a soft cloth to wipe the control panel area clean.
Enjoy the safety of this grounded appliance. The Blending Station
®
U.S.
power cord comes equipped with a three-prong (grounding) plug which
mates with a standard three-prong wall outlet (Figure A).
Adapters (Figure B) are available for two-prong outlets. Do not cut or
remove the third (ground) prong from the plug or power cord.
Consult your electrician if you are not sure if the wall outlet is grounded
through the building wiring. With a properly grounded two prong wall outlet,
ground the Blending Station by attaching the tab on the adapter to the wall
outlet cover by means of the screw in the center of the cover (Figure B).
SAVE THESE INSTRUCTIONS
Figure A
Figure B
THREE PRONG
ADAPTERS
ARE NOT TO
BE USED IN
CANADA.
3