Filter
Top Products
4. Select desired programmed setting by pressing any of the PRE-SET BUTTONS
1 through 6. The machine will begin immediately to cycle through the selected
program and turn off when the program is complete. Each button has a different
pre-selected combination of speed and length for blending.
NOTE: If you detect a change in the sound of the machine or if a hard or
foreign object comes into contact with the blades, do not serve the drink. Inspect
your blade assembly for loose, knicked or missing parts. If parts are loose, missing
or knicked, replace with a new blade assembly. (See page 17.)
5. Once one of the six PRE-SET PROGRAM buttons is pushed the machine will
start and stop automatically. By pressing another PRE-SET BUTTON or the
START/STOP button, the machine will stop the blending cycle.
6. During any of the blending cycles, by pressing the PULSE H button, the speed of
the blending can increase up to 100% of the motor speed. By pressing the PULSE
L button during a blending cycle, the speed of the motor can be decreased down to
7%. Once released, the motor speed will revert back to the blending cycle of the
PRE-SET PROGRAM.
NOTE: Use the SPEED CONTROL buttons to set the speed of the PULSE buttons.
For example, when the H or L PULSE button is pressed and held, by simultaneously
pressing and holding the
▲ or ▼ SPEED CONTROL button the motor speed will
increase or decrease in 1% increments. When the SPEED CONTROL button is
released, the PULSE button will remain set at the selected speed until altered with the
SPEED CONTROL buttons.
7. When the cycle is complete, the blender stops. Wait until blade comes to a
complete stop before removing the lid and/or container from the motor base.
8. Remove the container, pour, garnish and serve the drink.
How to operate your Blending Station
®
MP using
the Start/Stop and Speed Control buttons.
Although using the PRE-SET PROGRAMMED buttons is highly recommended for the
best drink, occasionally a drink may need special attention. By using
the
ST
AR
T/STOP button and the SPEED CONTROL button, you can manually control
the speed of the Blending Station MP
.
15
CONTINUED ON P
AGE
1
6