Filter
Top Products
CARE NOTE: Do not let mixtures, liquids and food products dry within the
container. Rinse throughout use. Drying product may lock around the blade and
weaken/tear the bearings seal when restarted. Do not place containers in the freezer.
Extremely low temperature combined with hot ingredients and/or the immediate
rapid action of the blade may crack the container.
Motor Base
1. Unplug the power cord.
2. Wash outside surface with a damp soft cloth or sponge, which has been rinsed
in a mild solution of liquid dish soap (Ivory Liquid
®
or equivalent) in warm water.
NEVER IMMERSE MOTOR BASE IN WATER OR OTHER LIQUID. NEVER
POUR WATER OR ANY OTHER LIQUID ON THE MOTOR BASE.
3. Polish with a soft cloth.
Control Panel
Gently wash the front panel with a soft cloth and a low pH balanced soap, being
careful not to scratch the Display Window.
NOTE: Be sure to wring excess water out of cloth or sponge when cleaning
around the controls, drive socket or any electrical part.
Lid
Separate the lid and plug, then wash in warm soapy water. Rinse clean under
running water and dry. Reassemble before use. (See pages 8 & 9.)
Cover Door
The cover can be removed (see page 9) and cleaned by placing under running
water and washed with a soft cloth. Wipe dry and replace back on the base.
NOTE: DO NOT wash cover door in dishwasher.
In-Counter Gasket
Carefully remove the gasket from under the blender (In-Counter model only). Wash
the gasket in warm, soapy water, rinse clean and let dry. Reassemble before use.
(See page 12.)
Make sure the gasket is seated properly against the blender
and the counter.
21
CONTINUED ON PAGE 22