Filter
Top Products
5
DISPLAY WINDOW - This area, depending on what button is pressed, displays a
variety of operation messages. A“READY” message appears
when there is power to the machine.
OWNER CONTROLS - A control panel accessible by pressing the Vita-Mix logo.
• Press once to reveal the mode message. Press button
1 then 6 within five seconds to continue. Once the correct code
is entered the display will indicate the motor temperature
(NORM, WARM, HOT), a usage count and a total. The
“COUNT” is a machine usage total and can be reset. This
can be used to keep a count of the number of drinks sold in
a week, day or even an hour. To clear, press and hold the
START/STOP button for 5 seconds. The “TOTAL” keeps track
of the machine usage, including production and testing, and
cannot be cleared.
• Press twice to reveal the name of the program controlling
the PRE-SET buttons. If you are using the MP settings,
this will read VITA-MIX SMOOTHIE PROGRAM.
• Press a third time to reveal an option to reset the
PRE-SET buttons to the original factory settings.
• Press a fourth time to exit and continue blending.
HIGH/LOW PULSE button - The pulse provides a quick increase or decrease in
speed of the blades when blending. Press H to increase the motor to speeds that
range from 51%-100%. Press L to decrease the motor speed down to a range of
50% -7%. The PULSE button will override the running program (as long as it is
depressed). Once released the original program continues its cycle.
• The PULSE high (H) and low (L) speed is set by using the SPEED
CONTROL buttons. To set, while pressing and holding a PULSE button,
press the SPEED CONTROL ▲ or ▼ button until the desired motor speed
is reached. The PULSE speed will remain at this setting until changed again
with the SPEED CONTROL
buttons.
MODE
READY
TEMP COUNT TOTAL
NORM 25 100
VITA-MIX
SMOOTHIE
PROGRAM
4 TO
OVERWRITE
CURRENT PROGRAM