Vita-Mix XTG012 Blender User Manual


 
NOTE: Outside the United States and Canada, your Blending Station
®
MP may
come with a different container configuration.
Two-Part Lid
48 oz. (1.4 liter) Maximum Performance Container
The two-part lid is easy to clean and easy to put on, take
off and seal.
• To remove a fully latched lid, lift the two tabs and pull
upward and off.
• Twist the center lid plug to fasten or remove.
NOTE: The Maximum Performance Container will not
work on older Vita-Mix
®
machines. If the container
does not fit on the centering pad and will not properly
engage into the drive socket, the container is not compatible
with your machine. Contact Vita-Mix for more information.
One-Piece Lid (optional)
48 oz. (1.4 liter) Maximum Performance Container
The one-piece lid is easy to clean and easy to put on and
take off.
• There is no lid plug for this lid.
Add ingredients through port on top.
Cover with Removable Hinge Design
Cover Door:
1. The Cover Door can be removed by opening it until the door is horizontal.
Then, gently spread the sides of the door over the round hinges and
remove.
2. To reinstall the Cover Door, gently spread the sides of the door and place
the door hinge cutouts over the round hinges. (Figure C)
Figure A
Figure B
8
L
id Assembly