Filter
Top Products
Fig. 26
Fig. 27
4. Reverse the procedure to install.
DOOR STRIKE ADJUSTMENT
INDEPENDENT DOORS)
1. Open the doors and inspect door strike for proper
shape.
A. Bend strike plate.
Fig. 28
2. Open and close the doors several times while
observing the roller latch and strike plate
operation.
A. Replace roller latch if malfunctioning as
outlined under ROLLER LATCH
ASSEMBLY (INDEPENDENT DOORS)
and adjust as outlined in this procedure.
3. Each oven door should open with a force of 8 to
25 pounds when pulled at the handle. The
adjustments must allow the doors to remain
closed during normal operation and allow
opening without exertion by the user.
VC3ED FULL SIZE ELECTRIC CONVECTION OVEN - SERVICE PROCEDURES AND ADJUSTMENTS
F45534 (0415) Page 18 of 31